подержанные машины: Прессы

The press is in good technical condition, can be tested.

Details:
Presskraft: 150 t
Die Abmessungen des Desktop: 1250x800 mm
Stößelhub: 7-120 mm

The machine is in good technical condition, possible to test under power.

Details:
Presskraft: 63 t
Die Abmessungen des Desktop: 400x500 mm
Stößelhub: 500 mm

The machine is in good technical condition, possible to test under power.

Details:
Presskraft: 250 t
Die Abmessungen des Desktop: 1120 x 800 mm
Stößelhub: 24-180 mm

The machine is in good technical condition, possible to test under power.

Details:
Presskraft: 100 t
Die Abmessungen des Desktop: 900 x 620 mm
Stößelverstellung: 80 ...

The machine is in good technical condition, possible to test under power.

Details:
Presskraft: 63 t
Die Abmessungen des Desktop: 800x630 mm
Stößelhub: 10-105 mm

Pressing force: 1400t, press-out length flat: 1500-12,000mm, recipient 1: max block diameter: 185mm, max block length: 350mm, recipient 2: max block diameter: 150mm, max block length: 580mm, max. ...

Catalog No. : 7360
Type: CLH 630 1/8
Producer: Vihorlat Snina
Made in: 1985
Characteristic:
Pressing force: 630 t

Catalog No. : 7359
Type: TL-4-250
Producer: RTS Rakovník
Made in: 1997
Characteristic:
The machine is in good condition.

good technical condition, under power

Details:
Druckleistung: 80 t
Abkantlänge: 2500 mm
Art der Pressenantrieb: Hydraulický
Maschinenabmessungen L x B x H: 2500 ...

Basisdaten:
Lagernummer: 27304
Kategorie: Einständer-Exzenterpressen
Fabrikat: EBU
Typ: SK 25
Baujahr: 1970
Steuerungsart: konventionell
Lagerort: ...

Connected load: 4kW, weight: 2t, an inspection is possible.

Ref.Nr.: INNO26505

Distance between the columns: 1100/400mm, max. ram stroke: 2x 1800mm, plunger diameter: 275/150mm, length: 2650mm, width: 2400mm, height: 4850mm, weight: 18t, has received UVV, the press control is ...

Machine type: Abkantpresse
Manufacturer: Promecam
Type: 50x2
Condition: used/functional
"
}, {
"translation" : "** Offer will only be sent if a complete ...

Handspindelpresse - Typ "NEHER"

-Guter Gebrauchter Zustand


Abmaße:
LxBxH 1,4x1,2x2.3Meter
Gewicht 850Kg

Wckq0zxa

Details:
Presskraft: 250 t
Einbauhohe: 550 mm
Durchgang zwischen den Ständern: 2000 mm
Aufspanntischfläche: 2450x880 mm
Stößelabmessungen: 1990x700 ...

pressure 10 t
throat 235 mm
stroke ca. 400 mm
stroke speed - idle stroke downwards 4,5 m/min
stroke speed - idle stroke upwards 10 m/min
dayligth ca. 500/600 mm

Basisdaten:
Lagernummer: 25949
Kategorie: Sonstige Pressen
Fabrikat: NEFF
Typ: CHS 60
Baujahr: 1979
Steuerungsart: konventionell
Lagerort: Wiesbaden

Working length: 3050mm, pressing force: 2500kN, number of operational hours unknown, including set of tools and documentation, on-site inspection is possible.

Ref.Nr.: INNO26377

hardly used, very good condition, all cylinders are tight, press control type PSSAS

Technical data:
pressure: 50 t
working length: 2550 mm
distance between columns: 2050 ...

The machine is in good technical condition, not under power.

Details:
Presskraft: 160 t
Die Abmessungen des Desktop: 1500x1000 mm
Stößelhub: 700 mm
Einbauhohe: ...

Max. pressing force: 4000kN, max. stroke: 500mm, installation height: 1100mm, table dimensions: 1200x800mm, max. working pressure: 300bar, weight: 23t, with documentation, was maintained regularly, an ...

Pressing force: 300t, there are also straightening machines and coilers available, with documentation, worked until the end, an on-site inspection is possible.

Ref.Nr.: INNO26342

Nominal pressing force: 100t, an inspection is possible.

Ref.Nr.: INNO26341

Machine type: Kniehebelpresse
Manufacturer: Schmidt
Type: 14R-08-2007
Year of construction: 2007
Weight: approx. 23kg
Force max. 12KN
Condition: used/very ...

Catalog No. : 7047
Type: HSP 600 AZ-RN a
Producer: Brunnhuber
Made in: 1969
Characteristic:
Pressing force: 610 t

Catalog No. : 7246
Type: HCFP
Producer: Hidroliksan
Made in: 2022
Characteristic:
Pressing force: 100 t
Length of the table: 1400 mm
Width of the ...

The machine is functional, it can be retested.

Details:
Presskraft: 400 t
Die Abmessungen des Desktop: 1250x825 mm
Stößelabmessungen: 900x560 mm
Hubanzahl: 18 ...

pressure 25 t
throat 300 mm
stroke 400 mm
Number of working hours 1235 h
table-size 650 x 500 mm
ram surface 550 x 450 mm
dayligth 700 mm
rapid traverse - ...

pressure 060 t
stroke 350 mm
table surface area 750x344 mm
dayligth 197/750 mm
distance between columns 750 mm
diameter of piston 75 mm
The data for this ad was ...

Technische Daten PDM100R-5393
Leistung [Tm] 100
ABMESSUNGEN DER UNTEREN PLATTE [mm] 900x600
ABMESSUNGEN DER OBEREN PLATTE [mm] 850x550
FÜHRUNGSSÄULEN (x4) [Ø mm] 50

The machine is good condition, under power, possible to test it. Without lower ejector.

Details:
Presskraft: 160 t
Die Abmessungen des Desktop: 900x630 mm

Lagernummer:
1106-PR133

Maschinenart:
Exzenterpresse - Einständer

Fabrikat:
SCHULER

Typ:
PDr 40/220

Baujahr:

Lagernummer:
1106-PR115

Maschinenart:
Viersäulenpresse - Hydraulisch

Fabrikat:
SOM TEC

Typ:
VSF 1

Baujahr:

Lagernummer:
1106-PR167

Maschinenart:
Hydraulische Presse

Fabrikat:
WMW

Typ:
PYE 10/250

Baujahr:
1958

Press Design
drive system:  eccentric / crank
frame design:  C-frame, single sided
openings in uprights:  yes
number of slide actions:   ...

greatest distance between table and ram: 800mm

Tested under power, good technical condition.

Details:
Presskraft: 250 t
Die Abmessungen des Desktop: 900x630 mm

Press/punch with injection molding unit

200 ton punch upstroke press with injection molding machine (400to)
Additional guard locking via 4 power strokes
Manufacturer: R+S ...

Specifications:
Number of stations: 12 (11+1)
Capacity per ram: 6 tons
Maximum stroke: 114 mm
Max. shell height: 50 mm
Standard ram pitch: 82 mm
Blank diameter: 80 ...

Machine type: Hose press/pneumatically
Manufacturer: Peters
Type: NDP
Bj. 2000
Condition: used/good
"
}, {
"translation" : "** Offer will only be ...

pressure 63 t
throat 500 mm
stroke 150 mm
table surface area 1000 x 800 mm
ram surface 1000 x 800 mm
dayligth 400 mm
total power requirement kW
weight of the ...

Machine type: Eccentric Press
Manufacturer: AMBOLD
Type/Model: EVSP 35
Year of construction: 1970
Machine condition: very good
Offer type: used machine

Machine in good condition, can be tested anytime.

Details:
Presskraft: 25 t
Die Abmessungen des Desktop: 500 x 700 mm
Stößelabmessungen: 120 mm

Machine in very good condition, can be tested any time.

Details:
Presskraft: 160 t
Die Abmessungen des Desktop: 900x630 mm
Stößelabmessungen: 750x450 mm

Machine in very good condition, can be tested anytime.

Details:
Presskraft: 80 t
Die Abmessungen des Desktop: 400x500 mm
Hauptmotorleistung: 7 kW

Details
pressure:6 t
stroke:1020 mm
total power requirement:3,5 kW

Description
Including feedCan only adjust between tips

Details
pressure:6 t
stroke:1020 mm
total power requirement:3,5 kW

Description
Including feedCan only adjust between tips

Drive power 55 / 4 kW
Tracking travel 28 mm
Safety distance 155 mm
Tracking travel time 97 ms
Oil filling 1200 liters

Changes and errors in the technical details ...

Press force 2000kN, lifting speed: 10mm/s, max. operating pressure: 32MPa, weight: 400kg, with steel base frame, on-site inspection is possible.

Ref.Nr.: INNO26204

Machine in very good condition, under power, can be inspected any time.
It has 8+1 axles, grip pneumatic, 2 rows of original knives.

Details:
Druckleistung: 100 t

Table press, pneumatically operated
Manufacturer K & W Beyer O.H.G
Type Q10EL
Power at 6 Atü 10 mkg
Triggering the movement via electric valve

...