подержанные машины: Обрабатывающие центры вертикальные

The machine is in good technical condition, under power, after agreement is possible to test it. Replaced bearings on the X-axis screw. Replaced the control unit with a new one. Without clamping ...

OSTERBERGER – High Speed Cutting- Spezialbearbeitungszentrum ORNAMENTUM500.3HSC mit FANUC® Nano- Konturentechnologie für die Modeaccessoire- beziehungsweise Schmuckindustrie und ähnlichen ...

x-travel 800 mm
y-travel 500 mm
z-travel 610 mm
Control Fanuc
type 18 M
table surface area 1000x500 mm
Tool changer 24
spindle taper ISO 40
turning ...

spindle motor + ZF gearbox performed GO
Siemens sliding motors - GO performed, encoders replaced
drives - cleaning, replacement of defective elements - warranty
Central cooling ...

Machine in good technical condition, can be tested under power.

Repairs on the machine:
2016 - cover plates, spindle gearbox, belts, belt tensioner pulley
2017 - replacement ...

Machine accuracy: up to 0.02mm

Included:
air extraction
external air conditioning of headstock
Heidenhain workpiece probe.

The machine is in good condition, ...

Equipmemt:
CNC control Heidenhain iTNC 530
Linear drive in the X axis
Pick-up tool changer with 30 magazine spaces
Chip conveyor
Flushing gun for chip rinsing

The machine is in good technical condition, under power, after agreement is possible to test it.

Details:
Steuerung Heidenhain : TNC 530
Aufspanntischfläche: 1500x1050 mm

Machine is in good condition, under power, can be tested, about 7 000 working hours, mainly in Aluminim. It has a deviations up to 0,15mm.

Details:
Steuerung Siemens: Sinumerik 828 ...

x-travel 1050 mm
y-travel 520 mm
z-travel 510 mm
control M 750 BM Mapps 4
number of spindle speeds 13000
tool taper MAS BT 40
transmission ratio 1
spindle ...

The machine is very good condition, under power , possible to test it.

Details:
Steuerung Heidenhain : TNC 640
Aufspanntischfläche: 800x650 mm
X Weg: 750 mm
Y ...

Catalog No. : 7113
Type: LP 130 S CNC
Producer: Laschet Partner
Made in: 2003
Characteristic:
Control system: SIEMENS
Machine weight: 5000 kg

x-travel 2000 mm
y-travel 600 mm
z-travel 500 mm
table surface area 2500 x 650 mm
spindle taper SK 40
control HEIDENHAIN, TNC 426
ATC 36 Pos
total power ...

The machine is in good condition, by prior arrangement, inspection is possible.

Details:
Steuerung Fanuc: 0i-MB
Aufspanntischfläche: 650x450 mm
X Weg: 560 mm
Z ...

The machine is in good technical condition, under power, after agreement is possible to test it.

Details:
Steuerung Mazatrol: MATRIX 2
Aufspanntischfläche: 630 x 500 mm

Control Mitsubishi
Control Mitsubishi
Control Mitsubishi
Area of application: Production of chassis components made of cast iron in
batches Nodular graphite in one clamping ...

Hurco Bearbeitungszentrum VMX 24 T
Technische Daten:
Verfahrweg x,y,z in mm: 610, 510, 610
Spindelnase-Aufspanntisch: 150-750 mm
Tisch-Aufspannfläche: 760x510

Catalog No. : 7145
Type: DMC 635 V eco
Producer: DMG
Made in: 2014
Characteristic:
Control system: Fanuc Series Oi-MC
Length of the working table: 790 ...

The machine is in good condition, can be tested.

Details:
Steuerung Mazatrol: Fusion 640 M
Aufspanntischfläche: 2000 x 760 mm
X Weg: 1740 mm
Y Weg: 760 mm

The machine is in good technical condition, under power, after agreement is possible to test it.

Details:
Steuerung Heidenhain : TNC 530
Aufspanntischfläche: 1300 x 600 ...

Catalog No. : 7111
Type: NEXUS 510 C
Producer: MAZAK
Made in: 2008
Characteristic:
Control system: MAZATROL MATRIX NEXUS
Total hours: 14206 h
Hours ...

The machine is in good technical condition, under power, after agreement is possible to test it.

Details:
Steuerung Haas: Control
Aufspanntischfläche: 1320 x 580 mm
X ...

The machine is in good technical condition, under power, after agreement is possible to test it.

Details:
Steuerung Heidenhain : TNC 530
Aufspanntischfläche: 1000 x 500 ...

Machine in very good condition.
Inspection under power in our warehouse possible.

Working hours:
Control on: 39167 hours
Machine on: 38088 hours
Program run: 11304 ...

The machine is in a good technical condition. Under power. It can be tested.

Details:
Steuerung Fanuc: Fanuc 31i
Aufspanntischfläche: 500 mm
X Weg: 625 mm
Y Weg: ...

Catalog No. : 7085
Type: VF-4SS
Producer: HAAS
Made in: 2019
Characteristic:
Control system: HAAS
Total hours: 11812 h
Hours on: 3354 h

Catalog No. : 7086
Type: VMC 1000S
Producer: PINNACLE
Made in: 2005
Characteristic:
Control system: Fanuc Series 0i- MB
Length of the working table: 1200 ...

Catalog No. : 7084
Type: Mikron VCE 750
Producer: HAAS
Made in: 1998
Characteristic:
Maximum table load (evenly distributed): 1350 kg
X-Axis travels: 760 ...

The machine is in excelent condition. Possible to test under power.

Details:
Steuerung Fanuc: 31i - B5
Aufspanntischfläche: 850x410 mm
X Weg: 700 mm
Y Weg: 400 ...

The machine is in excelent condition. Possible to test under power.

Details:
Steuerung Fanuc: 31i - B5
Aufspanntischfläche: 850x410 mm
X Weg: 700 mm
Y Weg: 400 ...

Catalog No. : 7077
Type: IKC-600FB
Producer: INAXES
Made in: 2017
Characteristic:
Total hours: 6051 h
Hours on: 2118 h
Length of the working table: ...

The machine is in good technical condition. It is possible to test under power.

Details:
Steuerung Fanuc: 0i Mate - MD
Aufspanntischfläche: 1200x600 mm
X Weg: 1020 ...

Machine type: vertical machining centers
Control type: Siemens 840D
Country of origin: Germany
Storage location: from location

Technical details
x-way /x-travel: ...

Machine in good technical condition. Can be tested under power.

Details:
Steuerung Heidenhain : TNC 426
Aufspanntischfläche: 500 x 380 mm
X Weg: 500 mm
Y Weg: ...

Machine is in good condition, under power and can be tested any time.

Details:
Steuerung FADAL: Fadal 88 CNC Control
Aufspanntischfläche: mm
X Weg: 1524 mm
Y ...

The machine is in good technical condition, it is possible to test under power.

Details:
Steuerung Siemens: Sinumerik 840 D
Aufspanntischfläche: 500x1000 mm
X Weg: 800 ...

Vertical machining centre DEPOCUT 2012, TAJMAC-ZPS
-Used machine, Construction Year 2013
-CNC control HEIDENHAIN iTNC 530
-X-Axis = 2.000 mm
-Y-axis = 1.200 mm

The machine is in good technical condition, under power, after agreement is possible to test it.

Details:
Steuerung Siemens: Sinumerik 810D ShopMill
Aufspanntischfläche: 630 ...

The machine is in good technical condition, under power, after agreement is possible to test it.

Details:
Steuerung Siemens: Sinumerik 810D ShopMill
Aufspanntischfläche: ...

The machine is in good condition, it can be retested.

Details:
Steuerung Hurco: UltiMax 4
Aufspanntischfläche: 760 x 510 mm
X Weg: 610 mm
Y Weg: 508 mm
Z ...

The machine is functional, can be retested.

Details:
Steuerung Haas:
Aufspanntischfläche: mm
X Weg: 1000 mm
Y Weg: 600 mm
Z Weg: 800 mm

The machine is functional, can be retested.

Details:
Aufspanntischfläche: 600 x 320 mm
X Weg: 700 mm
Y Weg: 360 mm
Z Weg: 270 mm
Spindeldrehzahl: 0 - 10000 ...

The machine is in good technical condition, possible to test under power.

Details:
Steuerung Yasnac:
Aufspanntischfläche: 559 x 400 mm
X Weg: 563 mm
Y Weg: 386 ...

Catalog No. : 7027
Type: ARROW 1000
Producer: Cincinnati
Made in: 2002
Characteristic:
Control system: Acramatic 2100
Length of the working table: 1120 ...

[TABELLE]
Zustand[NEUESPALTE]gebraucht
[NEUEZEILE]Lagernummer[NEUESPALTE]1072-20311
[NEUEZEILE]Maschinenart[NEUESPALTE]Bearbeitungszentrum
[NEUEZEILE]Fabrikat[NEUESPALTE]MÜGA ...

[TABELLE]
Zustand[NEUESPALTE]gebraucht
[NEUEZEILE]Lagernummer[NEUESPALTE]1072-20170
[NEUEZEILE]Maschinenart[NEUESPALTE]Bearbeitungszentrum
[NEUEZEILE]Fabrikat[NEUESPALTE]DMG

[TABELLE]
Zustand[NEUESPALTE]gebraucht
[NEUEZEILE]Lagernummer[NEUESPALTE]1072-20164
[NEUEZEILE]Maschinenart[NEUESPALTE]Bearbeitungszentrum

The machine is in good technical condition, under power, after agreement is possible to test it.

Details:
Steuerung Fanuc: 0i - MC
Aufspanntischfläche: 1624 x 660 mm
X ...

The machine is in excellent condition, can be retested

Details:
Steuerung Heidenhain : TNC 530
Aufspanntischfläche: 800x600 mm
X Weg: 600 mm
Y Weg: 450 mm

The machine is in good technical condition, possible to test under power.

Details:
Steuerung Fagor: CNC 8050
Aufspanntischfläche: 900 x 410 mm
X Weg: 760 mm
Y ...