подержанные машины: Строительные машины

Mixing weight recommended/max.: 30kg/35kg, container height: 60mm-400mm, max. container diameter at the bottom: 330mm. Dimensions X/Y/Z: 780mm/800mm/1090mm, weight: 207kg. Documentation available. ...

OSTERBERGER hydraulisch angetriebene Diamant- Seilsägemaschine DSMV490H. Vertikale Seilsägemaschine, kombiniert mit einem Schwenkarm, für das Sägen von diversem Steinmaterial wie zum Beispiel ...

This mixer was used in a paper factory for stirring waste water. Diameter: 2300mm, direction of rotation: left, speed: 22rpm. Agitator body: Hyperboloid with glass fiber reinforced plastic. Motor: ...

Seitenkippschaufel gebraucht

Abmessungen ca.:
Schneidenlänge 2120 mm
Höhe 950 mm
Tiefe Schaufel innen 800 mm
Gesamttiefe 1300 mm
Bolzendurchmesser 50 mm

length diverse mm
width diverse mm
height over floor diverse mm
quantity 4 STK
4 different metal conveyors
The data for this ad was created with ModulMWS - the software ...

plate thickness 1,5 mm
roll diameter 76 mm
bending speed 4,7/9,4 m/min
total power requirement 0,37/0,55 kW
weight of the machine ca. 160 kg
dimensions of the machine ca. ...

Net/gross volume mixer: 1500/2000l, useful volume secondary tank: 1790l, motor power: 55kW, length: 4700mm, width: 2500mm, height: 3400mm, weight mixer/ secondary tank:3.9/ 1.21t, with extensive ...

Capacity: 3000l, rotational speed: 1500/min, weight: 21t, with documentation.

Ref.Nr.: INNO26478

Motor power: 234kW, weight: 38t, operational hours counter: 25,323h, an inspection is possible.

Ref.Nr.: INNO26439

Includes (1) SBM semi-mobile asphalt processing plant, feed material: asphalt, feed size: 0-800mm, max. Feed quantity: 130t/h, bulk density: 1.7t/m³ with grain size 0/32mm, screening quality: GF85, ...

Motor power: 5.5kW, accessories/documentation are partially available, has been regularly serviced, on-site inspection is possible.

Ref.Nr.: INNO26404

Details:
saw blade diameter: 350 x 4,0 x 25,4 mm mm
cutting diameter: 120 mm
weight of the machine ca.: 150 kg
speeds: 4400 U/min
voltage: 400 V

Mobile crane Sennebogen 613M

The Sennebogen 613M is a material handler produced by Sennebogen, a German manufacturer of material handling equipment. Material handlers like the Sennebogen ...

Operating hours: 5332
There is no valid rope inspection.

The Sennebogen 613M is a specific model of a material handler, also known as a rubber-tired or mobile crane, manufactured by ...

Terex TC 20 used mini excavator for sale, second hand.

Specifications
Weight 2 to, three buckets, 30 cm, 50 cm 1.0 trench bucket, 1 rock chisel.
Operating hours 2778 h

Main dimensions
length ca. 82,50 m
width ca. 18,50 m
height ca. 21,00 m

Service mass
ca. 996 t

Power supply
6-kV- trailing cable

Main dimensions
length ca. 80,50 m
width ca. 20,00 m
height ca. 30,40 m

Service mass
ca. 1645 t

Power supply
6-kV- trailing cable

Main dimensions
length ca. 80,50 m
width ca. 20,00 m
height ca. 30,40 m

Service mass
ca. 1645 t

Power supply
6-kV- trailing cable

Main dimensions
length 137,00 m
width 50,60 m
height 40,50 m

Service mass
5118 t

Power supply
2 x 6-kV- trailing cable

Theoretical ...

Main dimensions
Länge 137,00 m
Breite 50,60 m
Höhe 40,50 m

Service mass
4986 t

Power supply
2 x 6-kV- trailing cable

Theoretical ...

Main dimensions
length 137,00 m
width 50,60 m
height 40,50 m

Service mass
5166 t

Power supply
2 x 6-kV- trailing cable

Theoretical ...

Includes aggregate weigher, cement weigher, water weigher, additive weigher, special material weigher, Schlossermixer and Biotronik control system, documentation available, on-site inspection is ...

Vacuum chamber dimensions: 800x670x550mm, product carrier dimensions: 730x570mm, working container capacity: 60l, storage container capacity: 60l, dynamic mixer, two different materials possible with ...

Machine type: Screw compressor
Manufacturer: Almig
Type: Belt 30-10
Year of construction: 2008
Condition: used/good
"
}, {
"translation" : "** ...

Machine type: Screw compressor
Manufacturer: Alup
Type: Allegro 30 /SO
Year of construction: 2002
Condition: used/good
"
}, {
"translation" : "** ...

Chain excavators
Manufacturer Zeppelin / Sennebogen
with hydraulic adjustable boom
Gripper cable
Joystick control
Weight approx. 18,500kg
Total width approx. ...

Hydraulic hammer demolition hammer for excavators from 4to to 9to
Manufacturer MUSTANG
Model HM300 (Unused)
Building YEAR 2021
Serial number AH21XXXX
Operating ...

Concrete spraying machine
Manufacturer Montanbüro
Type e.B. Elefantion
Unused!

Other unused and used concrete spraying machines in stock

Also ...

hardly used diesel high-pressure compressor from Bundewehr bestaenden.
Drive via Ferryman 1 cylinder diesel engine
Printing power 28bar
Fuel quantity 200 litres /min
...

Manufacturer Ruefli AG SA Biel - Bienne
Very powerful exhauster, suction system Spaene suction
with filter bag for woodworking machines,
Power 2.2kw 2850rpm.
machine ...

hardly used diesel high-pressure compressor from Bundewehr bestaenden.
Drive via Ferryman 1 cylinder diesel engine
Printing power 28bar
Fuel quantity 200 litres /min
...

Software included, an inspection is possible.

Ref.Nr.: INNO26148

hydraulic hammer, used
for excavators with 6-9 tons operating weight
operating weight: 375 kg
oil flow: 50-90 l/min
operating pressure: 120-150 kg/cm2
85dB(A) radius: ...

Bohak KL 150 crawler Drilling rig
4cl Perkins engine
4,7 tons
7,5 meter Boom
3,3 Tons Feed pressure
Winch

Drilling rods also Available

Capacity: 250l, weight: 1.75t, an inspection is possible.

Ref.Nr.: INNO26034

An inspection is possible, the machine needs to be overhauled.

Ref.Nr.: INNO26016

Capacity: 150l, rotational speed: 1440/min, motor power: 5.5kW.

Ref.Nr.: INNO25949

Stroke: 800mm, max. rotational speed: 1200/min, without documentation or accessories, an inspection is possible.

Ref.Nr.: INNO25922

There are three identical agitator tanks available, capacity: 10,000l, operating overpressure inner tank/ jacket: -1 to 6/ 6bar, diameter: 2500mm, height: 3180mm, weight: 10.5t, with motor, gearbox, ...

Effective width: 1500mm, screw diameter: 2x 500mm, motor power: 2x 3.5kW, outlet: 2x 800x800mm, length: 7000mm, conveying speed: 50m/min, with steel construction underframe, closed constructional ...

Motor power: 179kW, length: 9655mm, width: 2490mm, height: 2630mm, weight: 18.7t, with documentation.

Ref.Nr.: INNO25723

Number of axles 3 St.
length 15,4 m
total wight 48500 t
width 2,75 m
Number of axles 3 St.
length 15,4 m
total wight 48500 t
width 2,75 m
Number of ...

Water output: 4.6l/min, volume flow per double stroke: 78ml, compressed air supply: 6bar, length: 1000mm, width: 860mm, height: 1500mm, weight: 211kg, with documentation.

Ref.Nr.: ...

Details:
Condition: New
Location: Ennepetal - Hall 3
Delivery Terms: by agreement
Quotation: Free on truck from location

Technical data:
Volume: 0,15m³

Details:
Condition: New
Location: Ennepetal - Hall 3
Delivery Terms: by agreement
Quotation: Free on truck from location

Technical data:
Volume: 0,30m³

Rüttelplatte Dynapac LG 300

Diesel, Einsatzgewicht 290 kg
einsatzbereit

2 Glättteller für Betonglättmaschine Doppelflügelglätter **unbenutzt** Ø 1200 mm
mit 4-fach Aufnahme

Hydraulic pressure: 120bar, with Two-Cylinder Diesel Motor, scoop, the tires and rims were renewed.

Ref.Nr.: INNO25446

Connected load: 55kW, weight: 6.8t.

Ref.Nr.: INNO25395

Max. grain size: 32mm, max. delivery pressure: 75bar, max. rotational speed: 1500/min, max. hydraulic pressure: 300bar, connected load: 45kW, weight: 2.5t, operational hours counter: 2990h, with ...