подержанные машины: Строительные машины

Max. grain size: 32mm, max. delivery pressure: 75bar, max. rotational speed: 1500/min, max. hydraulic pressure: 300bar, connected load: 45kW, weight: 2.5t, operational hours counter: 2990h, with ...

With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod ...

Capacity: 800/1040l, max. operating temperature: 50°.

Ref.Nr.: INNO25259

number of controlled axis .
workpiece weight . kg
throat . mm
total power requirement . kW
weight of the machine ca. . t
dimensions of the machine ca. . m
number ...

Hydraulic pressure: 150bar, connected load: 32kW, including two containers.

Ref.Nr.: INNO25191

Length: 1750mm, width: 1675mm, with documentation.

Ref.Nr.: INNO19256

Microjet höhenverstellbarer, frequentgeregelter  Saugbandtisch

zum Adressieren
Länge ca. 1600m
Einlaufbreite ca 85.cm

V-belt-driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures a high efficiency
Container with a stoved inner coating
Standard ...

Long-lived, V-belt-driven compressor blocks
Electronic control AIR ENERGY CONTROL 3 with rotary direction control, display of operating hours, service charges, load hours, etc.
...

Auf dem Stautaktförderer mit 4 Stationen werden bei Bedarf Pakete, Zeitungs-,
Zeitschriften- und ähnliche Stapel-Druckprodukte aufgestaut und nach
Freigabe zeitverzögert ...

Number of axles 2 St.
length 7,7 m
total wight 20 t
axis load in front 10 t
axis load in the back 10 t
width 2,5 m
Number of axles 2 St.
length 7,7 m

blower power 19 kW
motor .
bucket Diesel .
blower power 19 kW
motor .
bucket Diesel .
blower power 19 kW
motor .
bucket Diesel .
blower power ...

Number of axles 2 St.
total wight 32,5 t
axis load in front 9 t
axis load in the back 9 t
tire equipment 385/65R22,5 .
Number of axles 2 St.
total wight 32,5 t

neu
ca. 12 - 14 Wochen ab Auf
T?rkei
50000 ?
1015 ?
6 mm
4 mm
50 mm
4000 mm
530 mm
4 kW
4250 mm
900 mm
...

neu
ca. 12 - 14 Wochen ab Auf
T?rkei
92000 ?
1849.2 ?
8 mm
5 mm
80 mm
10 mm
4500 mm
720 mm
95 (R 80) / 35 (R 25) mm

Details:
Condition: Used
Location: Ennepetal - Hall 3
Delivery Terms: immediately
Quotation: From stock - free on truck

weight: ca. 24 kg

Type: 250 ...

Details:
Origin: Germany
Condition: Used
Location: Ennepetal - Hall 1
Delivery Terms: immediately
Quotation: From stock - free on truck

Lifting height: ...

Details:
Condition: Used
Location: Ennepetal - Hall 3
Delivery Terms: available immediately
Quotation: Package shipping

length 1980 mm
width 670 mm
height over floor 850 mm
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions see picture / drawing, height + inclination adjustable, splitted band, height of cleats 15 mm, splitting of cleats 300 mm

Technical data:
weight of machine: 170 kg

semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply

Technical data:
cutting diameter: 100 mm
saw ...

There are one CANNON A System 100 Pro and one CANNON A-10 System Servo available, year of construction machine 1/ 2: 1995/ 2002, including documentation.

Ref.Nr.: INNO23915

including documentation, without accessories or spare parts.

Ref.Nr.: INNO23179

Rotational speed: 500-1400/min, motor power: 2.5kW, without documentation, the speed indicator is defective.

Ref.Nr.: INNO23146

Capacity: 400l, operational overpressure: -1 to 3bar, rotational speed: 32-1400/min, operational hours counter: 5003h, documentation available.

Ref.Nr.: INNO22010

Capacity: 400l, operational overpressure: -1 to 3bar, rotational speed: 32-1400/min, operational hours counter: 4234h, documentation available.

Ref.Nr.: INNO22009

Material: CrNi steel, rotational speed: 1000-3000/min, pump output: 1-2m³/h, connnected load: 1.2kW, machine was not used much.

Ref.Nr.: INNO21340

Details
output:5,8 kw
Year:1997
weight:485 kg
dimensions of the machine ca.:0,9 x 0,6 x 1,4 m

Details
output:3 kw
Year:1997
weight:73 kg
dimensions of the machine ca.:0,45 x 0,75 x 1000 m

They are new concrete steel cutting machines, concrete steel bending machines and various machines and accessories for concrete steel/bar steel of the GMS brand.

If you have any further ...

Universal snow shield
Width: 1200mm
Height: 400mm

Product data:
Condition: good

C.R.I. Drainage Pump DM-1M-55FF
KW: 5.5
380V
Amp.11 ,6A
Head 22m
Hmax: 32m
Series.No 13415G10063
Outlet 80mm

Product data:
Condition: ...

C.R.I. Drainage Pump DM-1M-150IT
380V
50Hz
30A
Head 27m
Hmax 40m
Series.No.13415G10035
Outlet 150mm

Product data:
Condition: good

Maquina en perfecto estado para su uso

Keep in mind that the advertisement was translated automatically and may have errors. We are not responsible for these errors.

Manufacturer: Longinotti
Type: K165/DS
Year of construction: 2007
Mould equipment: 400 x 400

AME PFS1300

-Fully Equipped Press with tiles transport and production boards magazine
-Lowerator and Elevator for production boards
-Hydraulic aggregate with Oil

Type: 939 II without Vorsatz
Year of production: 1980
Manual und automatic mode on tracks
Siemens Simatic S5
Max. Stone height: 600 mm

Pallet circulating system for wall elements made of pumice concrete, suitable for normal and lightweight concrete, formable surface: 1875x12,000mm, pallets dimensions: 2000x12,250mm, including wall ...

Capacity: 80l, max. material density: 2.7kg/l.

Ref.Nr.: INNO14063

Length: 9720mm, width: 2500mm, height: 3650mm, weight: 22t, operational hours: ca. 23.000h.

Ref.Nr.: INNO17050